diff --git a/README.md b/README.md
index 495c983..94eaca1 100644
--- a/README.md
+++ b/README.md
@@ -50,37 +50,36 @@ When running as a background daemon, TimeTurner provides a web interface for mon
 
 ## 🚀 Installation
 
-The `setup.sh` script compiles and installs the TimeTurner application. You can run it by cloning the repository with `git` or by using the `curl` command below for a git-free installation.
+The `setup.sh` script is provided to compile and install the TimeTurner application and its systemd service on a Debian-based system like Raspberry Pi OS.
 
 ### Prerequisites
 
-- **Internet Connection**: To download dependencies.
-- **Curl and Unzip**: The script requires `curl` to download files and `unzip` for the git-free method. The setup script will attempt to install these if they are missing.
+- **Rust and Cargo**: The script requires the Rust programming language toolchain. If you don't have it, install it from [rustup.rs](https://rustup.rs/).
 
-### Running the Installer (Recommended)
+### Running the Installer
 
-This command downloads the latest version, unpacks it, and runs the setup script. Paste it into your Raspberry Pi terminal:
-
-```bash
-curl -L https://github.com/cjfranko/NTP-Timeturner/archive/refs/heads/main.zip -o NTP-Timeturner.zip && \
-unzip NTP-Timeturner.zip && \
-cd NTP-Timeturner-main && \
-chmod +x setup.sh && \
-./setup.sh
-```
+1.  First, clone the repository:
+    ```bash
+    git clone https://github.com/cjfranko/NTP-Timeturner.git
+    cd NTP-Timeturner
+    ```
+2.  Make the script executable and run it. The script will use `sudo` for commands that require root privileges, so it may ask for your password.
+    ```bash
+    chmod +x setup.sh
+    ./setup.sh
+    ```
 
 ### What the Script Does
 
 The installation script automates the following steps:
 
-1.  **Installs Dependencies**: Installs `git`, `curl`, `unzip`, and necessary build tools.
-2.  **Compiles the Binary**: Runs `cargo build --release` to create an optimised executable.
-3.  **Creates Directories**: Creates `/opt/timeturner` to store the application files.
-4.  **Installs Files**: 
+1.  **Compiles the Binary**: Runs `cargo build --release` to create an optimised executable.
+2.  **Creates Directories**: Creates `/opt/timeturner` to store the application files.
+3.  **Installs Files**: 
     - The compiled binary is copied to `/opt/timeturner/timeturner`.
     - The web interface assets from the `static/` directory are copied to `/opt/timeturner/static`.
     - A symbolic link is created from `/usr/local/bin/timeturner` to the binary, allowing it to be run from any location.
-5.  **Sets up Systemd Service**: 
+4.  **Sets up Systemd Service**: 
     - Copies the `timeturner.service` file to `/etc/systemd/system/`.
     - Enables the service to start automatically on system boot.
 
diff --git a/config.yml b/config.yml
index bc552ee..bf892f4 100644
--- a/config.yml
+++ b/config.yml
@@ -12,8 +12,8 @@ defaultNudgeMs: 2
 # Time-turning offsets. All values are added to the incoming LTC time.
 # These can be positive or negative.
 timeturnerOffset:
-  hours: 0
-  minutes: 0
-  seconds: 0
-  frames: 0
-  milliseconds: 0
+  hours: 1
+  minutes: 2
+  seconds: 3
+  frames: 4
+  milliseconds: 5
diff --git a/setup.sh b/setup.sh
index 3dffd84..eb1be25 100644
--- a/setup.sh
+++ b/setup.sh
@@ -21,8 +21,7 @@ echo "Detected package manager: $PKG_MANAGER"
 # --- Update System Packages ---
 echo "Updating system packages..."
 if [ "$PKG_MANAGER" == "apt" ]; then
-    sudo apt update
-    sudo DEBIAN_FRONTEND=noninteractive apt upgrade -y -o Dpkg::Options::="--force-confold"
+    sudo apt update && sudo apt upgrade -y
 elif [ "$PKG_MANAGER" == "dnf" ]; then
     sudo dnf upgrade -y
 elif [ "$PKG_MANAGER" == "pacman" ]; then
@@ -49,29 +48,14 @@ fi
 echo "Installing common build dependencies..."
 if [ "$PKG_MANAGER" == "apt" ]; then
     sudo apt update
-    sudo apt install -y build-essential libudev-dev pkg-config curl wget
+    sudo apt install -y build-essential libudev-dev pkg-config curl
 elif [ "$PKG_MANAGER" == "dnf" ]; then
-    sudo dnf install -y gcc make perl-devel libudev-devel pkg-config curl wget
+    sudo dnf install -y gcc make perl-devel libudev-devel pkg-config curl
 elif [ "$PKG_MANAGER" == "pacman" ]; then
     sudo pacman -Sy --noconfirm base-devel libudev pkg-config curl
 fi
 echo "Common build dependencies installed."
 
-# --- Install Python dependencies for testing ---
-echo "🐍 Installing Python dependencies for test scripts..."
-if [ "$PKG_MANAGER" == "apt" ]; then
-    # python3-serial is the name for pyserial in apt
-    sudo apt install -y python3 python3-pip python3-serial
-elif [ "$PKG_MANAGER" == "dnf" ]; then
-    # python3-pyserial is the name for pyserial in dnf
-    sudo dnf install -y python3 python3-pip python3-pyserial
-elif [ "$PKG_MANAGER" == "pacman" ]; then
-    # python-pyserial is the name for pyserial in pacman
-    sudo pacman -Sy --noconfirm python python-pip python-pyserial
-fi
-# sudo pip3 install pyserial # This is replaced by the native package manager installs above
-echo "✅ Python dependencies installed."
-
 # --- Apply custom splash screen ---
 if [[ "$(uname)" == "Linux" ]]; then
     echo "🖼️  Applying custom splash screen..."
@@ -116,10 +100,10 @@ echo "Removing NTPD (if installed) and installing Chrony, NMTUI, Adjtimex..."
 if [ "$PKG_MANAGER" == "apt" ]; then
     sudo apt update
     sudo apt remove -y ntp || true # Remove ntp if it exists, ignore if not
-    sudo apt install -y chrony network-manager adjtimex
+    sudo apt install -y chrony nmtui adjtimex
     sudo systemctl enable chrony --now
 elif [ "$PKG_MANAGER" == "dnf" ]; then
-    sudo dnf remove -y ntp
+    sudo dnf remove -y ntp || true
     sudo dnf install -y chrony NetworkManager-tui adjtimex
     sudo systemctl enable chronyd --now
 elif [ "$PKG_MANAGER" == "pacman" ]; then
@@ -132,142 +116,29 @@ fi
 
 echo "NTPD removed (if present). Chrony, NMTUI, and Adjtimex installed and configured."
 
-# --- Configure Chrony to act as a local NTP server ---
-echo "⚙️  Configuring Chrony to serve local time..."
-# The path to chrony.conf can vary
-if [ -f /etc/chrony/chrony.conf ]; then
-    CHRONY_CONF="/etc/chrony/chrony.conf"
-elif [ -f /etc/chrony.conf ]; then
-    CHRONY_CONF="/etc/chrony.conf"
-else
-    CHRONY_CONF=""
-fi
-
-if [ -n "$CHRONY_CONF" ]; then
-    # Comment out any existing pool, server, or sourcedir lines to prevent syncing with external sources
-    echo "Disabling external NTP sources..."
-    sudo sed -i -E 's/^(pool|server|sourcedir)/#&/' "$CHRONY_CONF"
-
-    # Add settings to the top of the file to serve local clock
-    # Using a temp file to prepend is safer than multiple sed calls
-    TEMP_CONF=$(mktemp)
-    cat <<EOF > "$TEMP_CONF"
-# Serve the system clock as a reference at stratum 1
-server 127.127.1.0
-allow 127.0.0.0/8
-local stratum 1
-
-EOF
-    # Append the rest of the original config file after our new lines
-    cat "$CHRONY_CONF" >> "$TEMP_CONF"
-    sudo mv "$TEMP_CONF" "$CHRONY_CONF"
-
-
-    # Add settings to the bottom of the file to allow LAN clients
-    echo "Allowing LAN clients..."
-    sudo tee -a "$CHRONY_CONF" > /dev/null <<EOF
-
-# Allow LAN clients to connect
-allow 0.0.0.0/0
-EOF
-
-    # Restart chrony to apply changes (service name can be chrony or chronyd)
-    echo "Restarting Chrony service..."
-    sudo systemctl restart chrony || sudo systemctl restart chronyd
-    echo "✅ Chrony configured."
-else
-    echo "⚠️  Warning: chrony.conf not found. Skipping Chrony configuration."
-fi
-
-
 # --- Install and configure WiFi hotspot and captive portal ---
 echo "📡 Installing and configuring WiFi hotspot and captive portal..."
 
 if [ "$PKG_MANAGER" == "apt" ]; then
-    # Stop the service if it's running from a previous installation to prevent "Text file busy" error.
-    echo "Stopping existing nodogsplash service before installation..."
-    sudo systemctl stop nodogsplash || true
-
-    # We will use dnsmasq for DHCP, as the compiled nodogsplash version may not support the internal DHCP server.
-    # sudo apt-get remove --purge -y dnsmasq || true # This line is no longer needed.
-
-    # Install dependencies for hotspot and for building nodogsplash.
-    sudo apt install -y hostapd dnsmasq git libmicrohttpd-dev libjson-c-dev iptables
-    
-    # Force iptables-legacy for nodogsplash
-    echo "Setting iptables-legacy mode for nodogsplash..."
-    sudo update-alternatives --set iptables /usr/sbin/iptables-legacy
-    sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
-
-    echo "Building and installing nodogsplash from source..."
-    # Create a temporary directory for the build
-    BUILD_DIR=$(mktemp -d)
-    git clone https://github.com/nodogsplash/nodogsplash.git "$BUILD_DIR"
-    
-    # Run the build in a subshell to isolate the directory change
-    (
-        cd "$BUILD_DIR"
-        make
-        sudo make install
-        
-        # Manually install the systemd service file as 'make install' might not do it.
-        # This makes the script more robust.
-        if [ -f "debian/nodogsplash.service" ]; then
-            echo "Manually installing systemd service file..."
-            sudo cp debian/nodogsplash.service /etc/systemd/system/nodogsplash.service
-            # Reload systemd to recognize the new service
-            sudo systemctl daemon-reload
-        else
-            echo "⚠️  Warning: nodogsplash.service file not found in source. Cannot set up as a service."
-        fi
-    )
-
-    # Clean up the build directory
-    sudo rm -rf "$BUILD_DIR"
-    echo "✅ nodogsplash installed successfully."
-
-    # Disable the standalone hostapd service to let NetworkManager manage it.
-    sudo systemctl disable hostapd
-    sudo systemctl mask hostapd
+    sudo apt install -y hostapd dnsmasq nodogsplash
+    sudo systemctl unmask hostapd
+    sudo systemctl enable hostapd
     sudo systemctl enable nodogsplash
-else
-    echo "This script is designed for Debian-based systems like Raspberry Pi OS."
-    echo "Skipping WiFi hotspot setup."
 fi
 
 # Stop services to configure
-# Ensure services exist before trying to stop them
-sudo systemctl stop hostapd || true
-sudo systemctl stop dnsmasq || true
+sudo systemctl stop hostapd
+sudo systemctl stop dnsmasq
+sudo systemctl stop nodogsplash
 
-# Ensure NetworkManager is managing wlan0 by removing any conflicting configurations.
-# This is the critical fix for the "No suitable device" error.
-echo "Ensuring NetworkManager is managing wlan0..."
-sudo rm -f /etc/NetworkManager/conf.d/99-unmanaged-wlan0.conf
-sudo systemctl reload NetworkManager
-
-# Configure static IP for wlan0 using NetworkManager (nmcli)
-echo "Configuring static IP for wlan0 using NetworkManager..."
-
-# Define the connection name
-CON_NAME="TimeTurner-AP"
-
-# If a connection with this name already exists, delete it to ensure a clean slate.
-if nmcli c show --active | grep -q "$CON_NAME"; then
-    sudo nmcli c down "$CON_NAME" || true
-fi
-if nmcli c show | grep -q "$CON_NAME"; then
-    echo "Deleting existing '$CON_NAME' connection profile..."
-    sudo nmcli c delete "$CON_NAME" || true
-fi
-
-# Create a new connection profile for the Access Point with a static IP.
-echo "Creating new '$CON_NAME' connection profile..."
-sudo nmcli c add type wifi ifname wlan0 con-name "$CON_NAME" autoconnect yes ssid "TimeTurner"
-sudo nmcli c modify "$CON_NAME" 802-11-wireless.mode ap 802-11-wireless.band bg
-sudo nmcli c modify "$CON_NAME" 802-11-wireless-security.key-mgmt wpa-psk
-sudo nmcli c modify "$CON_NAME" 802-11-wireless-security.psk "harry-ron-hermione"
-sudo nmcli c modify "$CON_NAME" ipv4.method manual ipv4.addresses 10.0.252.1/24
+# Configure static IP for wlan0
+echo "Configuring static IP for wlan0..."
+sudo sed -i '/^interface wlan0/d' /etc/dhcpcd.conf
+sudo tee -a /etc/dhcpcd.conf > /dev/null <<EOF
+interface wlan0
+    static ip_address=10.0.252.1/24
+    nohook wpa_supplicant
+EOF
 
 # Configure dnsmasq for DHCP
 echo "Configuring dnsmasq..."
@@ -277,64 +148,44 @@ dhcp-range=10.0.252.10,10.0.252.50,255.255.255.0,24h
 address=/#/10.0.252.1
 EOF
 
+# Configure hostapd
+echo "Configuring hostapd..."
+sudo tee /etc/hostapd/hostapd.conf > /dev/null <<EOF
+interface=wlan0
+driver=nl80211
+ssid=TimeTurner
+hw_mode=g
+channel=7
+wmm_enabled=0
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=2
+wpa_passphrase=harry-ron-hermione
+wpa_key_mgmt=WPA-PSK
+rsn_pairwise=CCMP
+EOF
+
+sudo sed -i 's|#DAEMON_CONF=""|DAEMON_CONF="/etc/hostapd/hostapd.conf"|' /etc/default/hostapd
+
 # Configure nodogsplash for captive portal
 echo "Configuring nodogsplash..."
 sudo tee /etc/nodogsplash/nodogsplash.conf > /dev/null <<EOF
 GatewayInterface wlan0
 GatewayAddress 10.0.252.1
-MaxClients 250
-AuthIdleTimeout 480
+MaxClients 50
+ClientIdleTimeout 3600
 FirewallRuleSet preauthenticated-users {
     FirewallRule allow tcp port 80
-    FirewallRule allow tcp port 53
-    FirewallRule allow udp port 53
 }
 RedirectURL http://10.0.252.1/static/index.html
 EOF
 
-# Restart services in the correct order and add delays to prevent race conditions
-echo "Restarting services..."
-# Bring up the new AP connection using nmcli
-sudo nmcli c up "$CON_NAME"
-
-# Wait for the interface to come up and get the IP address
-echo "Waiting for wlan0 to be configured..."
-IP_CHECK=""
-# Loop for up to 30 seconds waiting for the IP
-for i in {1..15}; do
-    # The '|| true' prevents the script from exiting if grep finds no match
-    IP_CHECK=$(ip -4 addr show wlan0 | grep -oP '(?<=inet\s)\d+(\.\d+){3}' || true)
-    if [ "$IP_CHECK" == "10.0.252.1" ]; then
-        break
-    fi
-    echo "Still waiting for IP..."
-    sleep 2
-done
-
-# Check for the IP address before starting nodogsplash
-if [ "$IP_CHECK" == "10.0.252.1" ]; then
-    echo "✅ wlan0 configured with IP $IP_CHECK."
-    sudo systemctl restart dnsmasq
-    if command -v nodogsplash &> /dev/null; then
-        echo "Attempting to start nodogsplash service..."
-        if ! sudo systemctl restart nodogsplash; then
-            echo "❌ nodogsplash service failed to start. Displaying logs..."
-            # Give a moment for logs to be written
-            sleep 2
-            sudo journalctl -u nodogsplash.service --no-pager -n 50
-            echo ""
-            echo "To debug further, run nodogsplash in the foreground with this command:"
-            echo "  sudo /usr/bin/nodogsplash -f -d 7"
-            echo ""
-            exit 1
-        fi
-        echo "✅ nodogsplash service started successfully."
-    fi
-else
-    echo "❌ Error: wlan0 failed to get the static IP 10.0.252.1. Found: '$IP_CHECK'."
-    echo "Please check 'sudo nmcli c show \"$CON_NAME\"' and 'ip addr show wlan0'."
-    exit 1
-fi
+# Restart services
+sudo systemctl restart dhcpcd
+sudo systemctl restart dnsmasq
+sudo systemctl restart hostapd
+sudo systemctl restart nodogsplash
 
 echo "✅ WiFi hotspot and captive portal configured. SSID: TimeTurner, IP: 10.0.252.1"
 echo "Clients will be redirected to http://10.0.252.1/static/index.html"
@@ -361,7 +212,6 @@ sudo ln -sf $INSTALL_DIR/timeturner $BIN_DIR/timeturner
 echo "✅ Binary and assets installed to $INSTALL_DIR, and binary linked to $BIN_DIR."
 
 # 4. Install systemd service file
-# Only needed for Linux systems (e.g., Raspberry Pi OS)
 if [[ "$(uname)" == "Linux" ]]; then
     echo "⚙️  Installing systemd service for Linux..."
     sudo cp timeturner.service /etc/systemd/system/
@@ -376,20 +226,14 @@ echo ""
 echo "--- Setup Complete ---"
 echo "The TimeTurner daemon is now installed."
 echo "The working directory is $INSTALL_DIR."
-# Copy default config.yml from repo if it exists
-if [ -f config.yml ]; then
-    sudo cp config.yml $INSTALL_DIR/
-    echo "Default 'config.yml' installed to $INSTALL_DIR."
-else
-    echo "⚠️  No default 'config.yml' found in repository. Please add one if needed."
-fi
+echo "A default 'config.yml' will be created there on first run."
 echo ""
 if [[ "$(uname)" == "Linux" ]]; then
     echo "To start the service, run:"
     echo "  sudo systemctl start timeturner.service"
     echo ""
     echo "To view live logs, run:"
-    echo "  journalctl -u tim_turner.service -f"
+    echo "  journalctl -u timeturner.service -f"
     echo ""
 fi
 echo "To run the interactive TUI instead, simply run from the project directory:"