additional fields in curses

timeturner.py

@@ -1,71 +1,117 @@
+# -*- coding: utf-8 -*-
 import curses
 import serial
 import re
-from datetime import datetime
 import time
+from datetime import datetime
 
-# Configurable parameters
+# Serial config
 SERIAL_PORT = "/dev/ttyACM0"
 BAUD_RATE = 115200
 REFRESH_INTERVAL = 0.5  # seconds
 
-# Regex to match LTC lines
+# Regex pattern
 ltc_pattern = re.compile(
     r"\[(LOCK|FREE)\]\s+(\d{2}:\d{2}:\d{2}[:;]\d{2})\s+\|\s+([\d.]+fps)", re.IGNORECASE
 )
 
-def read_ltc(ser):
+# Stats
-    """Reads and parses one line of LTC from the serial interface"""
+lock_count = 0
-    try:
+free_count = 0
-        line = ser.readline().decode(errors='ignore').strip()
+last_frame = None
-        match = ltc_pattern.match(line)
+drift_warnings = []
-        if match:
+
-            status, timecode, framerate = match.groups()
+def parse_timecode(tc_str):
-            return f"{status} {timecode} ({framerate.upper()})"
+    sep = ":" if ":" in tc_str else ";"
-        return None
+    h, m, s, f = map(int, tc_str.replace(";", ":").split(":"))
-    except:
+    return h, m, s, f, sep
-        return None
+
+def timecode_to_milliseconds(h, m, s, f, fps):
+    return int(((h * 3600 + m * 60 + s) * 1000) + (f * (1000 / fps)))
+
+def get_offset(system_dt, h, m, s, f, fps):
+    sys_ms = (system_dt.hour * 3600 + system_dt.minute * 60 + system_dt.second) * 1000 + system_dt.microsecond // 1000
+    ltc_ms = timecode_to_milliseconds(h, m, s, f, fps)
+    return sys_ms - ltc_ms
+
+def format_offset(ms, fps):
+    frame_duration = 1000 / fps
+    frame_offset = int(round(ms / frame_duration))
+    return f"{ms:+} ms ({frame_offset:+} frames)"
 
 def draw_ui(stdscr):
-    curses.curs_set(0)  # Hide cursor
+    global lock_count, free_count, last_frame, drift_warnings
-    stdscr.nodelay(True)
+
-    stdscr.timeout(int(REFRESH_INTERVAL * 1000))
+    curses.curs_set(0)
+    stdscr.nodelay(True)
 
-    # Open serial connection
     try:
         ser = serial.Serial(SERIAL_PORT, BAUD_RATE, timeout=1)
     except serial.SerialException as e:
-        stdscr.addstr(0, 0, f"[ERROR] Failed to open serial: {e}")
+        stdscr.addstr(0, 0, f"[ERROR] Couldn't open {SERIAL_PORT}: {e}")
         stdscr.getch()
         return
 
-    ltc_string = "Waiting for LTC…"
+    # Init variables
+    ltc_status = "--"
+    ltc_timecode = "--:--:--:--"
+    framerate = "--"
+    offset_str = "--"
 
     while True:
         try:
+            line = ser.readline().decode(errors='ignore').strip()
+            match = ltc_pattern.match(line)
+            now = datetime.now()
+
+            if match:
+                status, tc_str, fps_str = match.groups()
+                ltc_status = status
+                ltc_timecode = tc_str
+                framerate = fps_str
+                fps = float(fps_str.lower().replace("fps", ""))
+
+                h, m, s, f, sep = parse_timecode(tc_str)
+                current_frame = timecode_to_milliseconds(h, m, s, f, fps)
+
+                # Drift detection
+                if last_frame is not None:
+                    expected = last_frame + int(1000 / fps)
+                    if abs(current_frame - expected) > int(2 * (1000 / fps)):
+                        drift_warnings.append(f"Drift: Δ{current_frame - last_frame} ms")
+                        if len(drift_warnings) > 3:
+                            drift_warnings.pop(0)
+                last_frame = current_frame
+
+                # Sync offset
+                offset_ms = get_offset(now, h, m, s, f, fps)
+                offset_str = format_offset(offset_ms, fps)
+
+                # Stats
+                if ltc_status == "LOCK":
+                    lock_count += 1
+                else:
+                    free_count += 1
+
+            # UI
             stdscr.clear()
-
+            stdscr.addstr(0, 0, "🕰  NTP Timeturner v0.3")
-            # Read LTC if available
+            stdscr.addstr(2, 0, f"LTC Status   : {ltc_status}")
-            new_ltc = read_ltc(ser)
+            stdscr.addstr(3, 0, f"LTC Timecode : {ltc_timecode}")
-            if new_ltc:
+            stdscr.addstr(4, 0, f"Frame Rate   : {framerate}")
-                ltc_string = new_ltc
+            stdscr.addstr(5, 0, f"System Clock : {now.strftime('%H:%M:%S.%f')[:-3]}")
-
+            stdscr.addstr(6, 0, f"Sync Offset  : {offset_str}")
-            # Get system time
+            stdscr.addstr(7, 0, f"Lock Ratio   : {lock_count} LOCK / {free_count} FREE")
-            now = datetime.now().strftime("%Y-%m-%d %H:%M:%S")
+            if drift_warnings:
-
+                stdscr.addstr(9, 0, f"⚠️  {drift_warnings[-1]}")
-            # Draw UI
+            stdscr.addstr(11, 0, "Press Ctrl+C to exit.")
-            stdscr.addstr(0, 0, "🕰️  NTP Timeturner v0.1")
-            stdscr.addstr(2, 0, f"LTC Timecode:   {ltc_string}")
-            stdscr.addstr(3, 0, f"System Clock:   {now}")
-            stdscr.addstr(5, 0, "Press Ctrl+C to quit.")
-
             stdscr.refresh()
             time.sleep(REFRESH_INTERVAL)
 
         except KeyboardInterrupt:
             break
         except Exception as e:
-            stdscr.addstr(7, 0, f"[EXCEPTION] {e}")
+            stdscr.addstr(13, 0, f"[EXCEPTION] {e}")
             stdscr.refresh()
             time.sleep(1)